April 9, 2016

It's so fun when....

...i discover a tool that makes my life just a little bit easier.
  Okay...A LOT!!

Many of you are familiar with Linda Hrcka aka: The Quilted Pineapple.  

photo belongs to Linda Hrcka

Linda developed and sells great acrylic rulers...extremely useful rulers,
for longarmers... 

AND domestic machine quilters too, like Karen Miller of the
photo belongs to Karen Miller

I recently received Linda's new QP Edge Straight Ruler set and could not WAIT to try them out!  
photo belongs to Linda Hrcka

I've been doing lots of edge to edge quilting lately with no chance to play with my new rulers.  I was getting ready to sew a binding onto a client's quilt and had a huge ah ha moment! :)
I sew bindings on, using my longarm.
If you've not done this before, i'm going to take you through a quick tut showing you how!


Back in 2012, i wrote a blog post called 'The Trip Around My Longarm...' demonstrating how to attach a binding using a longarm quilting machine.  It's easy to do, but i always struggled with one important element; maintaining the quarter inch.  Until Now! YIPPEEE!!!

Here's How....
Finish machine quilting the quilt and while the quilt is still loaded on the longarm, place the beginning of the binding strip about 2/3rds of the way down the right side of the quilt.  Leave an unstitched beginning tail at least 12" long, and start to sew.  (see second picture for ruler placement)



Each line (even the dashed lines) on Linda's QP Edge Straight rulers represent 1/4".   Place the appropriate line on top of the binding fold.  The ruler provides a nice steady straight edge to follow and maintains the quarter inch seam.  
*(The binding below is cut 2-1/2", therefore the 'prepared folded binding' measures 1-1/4".  My hopping foot measures 1/2".  I have placed the 3/4" line of the ruler on top of the binding fold.)    Make sense?

Before Linda's rulers, i would try to manually keep the edge of my hopping foot even with the raw edge of the binding with no support from a ruler.  I never had one that offered these great markings.     


The Next 3 pictures show how to handle the corners....

Stop a 1/4" from the end of the quilt, take a small back stitch, then move the needle away from the corner.  I have my needle set to the down position when i stop.  Just leave the needle down and follow the next couple pictures.


 Fold the binding away from the quilt, creating a right angle.



Fold the binding back over, keeping the 'right angle fold' in place underneath.  


Move the needle back into place.  Using a line from the ruler as the guide, take a couple back stitches and continue to attach the binding.  



This picture shows the binding sewn to the bottom of the quilt.



The next 3 pictures show the binding up the left side of the quilt and mitering the top left hand corner.




The left hand corner has been mitered and stitched into place.  The lines on the ruler are creating a nice right angle with the binding. The binding is being sewn to the top of the quilt.


Zipping right along the top!  The ruler line is following the binding fold and hopping foot is on the raw edge of the binding!  LOVE!!


Final top right hand corner!






Back on the right side of the quilt...heading towards the beginning tail



Leave an approximate 12" unstitched ending tail.  
I take a back stitch in both beginning and ending tails.  


Take the quilt off the longarm and trim the entire quilt using....
what else?  Linda's QP Edge Straight Ruler!  SWEET!!


But Wait!  There's More!  LOL
Notice in the picture above, the rulers also have 45 degree angle markings?   Use one to draw the diagonal line necessary when attaching the binding tails!  

Sew the beginning and ending tails together, and the remaining unstitched binding on a domestic sewing machine.  

Important note:  When using acrylic rulers, i always have a longarm ruler base attached.  

Get your own QP Rulers   You'll love them!!!

Print Friendly and PDF

13 comments:

  1. Awesome tutorial! I have never tried to attach binding on my LA, must try that. Thanks for sharing!

    ReplyDelete
  2. You are really amazing my friend. An awesome tutorial and great use of The QP Edge. Loving the creativity! Special thanks for the shout out! ❤️❤️❤️

    ReplyDelete
  3. I've never done a binding on my long arm either. Using these rulers(which I have!) is genius! I need to try this. Thanks so much for all the great pictures!

    ReplyDelete
    Replies
    1. Glad you have a set of these rulers! You must try this! It's really super simple!

      Delete
  4. Woohoo! You just solved a big problem for me. I attach bindings a lot, and have gotten better at it, but there were still wobbles. This will make those go away. Thanks. You are a genius. :-)

    ReplyDelete
    Replies
    1. This was such a yay day for me! I kept staring at my new rulers hanging on the wall...dying to try them! As i got ready to sew on the binding, i just happened to glance up...and Ding! i had a genius moment! ha ha....

      Delete
  5. Just FYI, I use an abbreviated Sharon Schamber method to Elmer's glue the binding to the back of the quilt and avoid having a million pins when machine stitching it. I do sew binding on by hand sometimes, but a lot of my quilts are going to be washed and used, and machine binding gets the job done!
    https://www.youtube.com/watch?v=a2hWQ5-ZccE&feature=youtu.be

    ReplyDelete
  6. very photo heavy post.thanks SEW much!

    ReplyDelete
    Replies
    1. I'd rather seen tons pictures than a lot of words...and still, i have too many words... lol

      Delete

LinkWithin

Related Posts Plugin for WordPress, Blogger...